Two-Cylinder Lego Pneumatic Engine
Specifications:
2X Pneumatic Cylinders
|
2X Pneumatic Valves
|
4X 40-tooth Gears
|
4X 24-tooth Gears
|
4X 8-tooth Gears
|
2X 12-tooth Gears
|
2X 20-tooth Gears
|
1:15 Gear Ratio
|
25-50 PSI Pressure
|
The Engine:
Two Lego
pneumatic cylinders convert linear motion of the cylinders into
rotational motion via a cam-action. As the cams turn they also turn
a set of pneumatic valves controlling the input air to each cylinder
(like a real engine the valves have to be timed when they provide
air or not). The cylinders also drive a set of 40-tooth gears to
provide power to a transmission. It operates between 25 to 50 psi of
pressure from an airbrush compressor.
The Transmission:
Connected to the
engine, it gears the engine up by a factor of 15. In turn the ratio
at the output axle is 1:15 meaning every time the engine rotates
completely once, the output axle (where the wheels are) rotate
completely fifteen times. The engine turns slowly however it
produces a significant amount of torque.
lego/Building
Instructions/engine.L3B
lego/Building Instructions/engine+trans.L3B |